2015-2020 Ford F-150 Fender Door FLE 3Z-16720-E Nameplate Set

2015-2020 Ford F-150 Fender Door FLE 3Z-16720-E Nameplate Set

Restore the sharp, commanding profile of your truck with this premium 2015-2020 Ford F-150 Fender Door FLE 3Z-16720-E Nameplate Set. Years of highway driving, intense sun exposure, and high-pressure car washes take a serious toll on original factory trim, causing them to fade, scratch, or lose their adhesive backing. This high-quality replacement emblem set is the ultimate solution to bring back the crisp, bold definition of your truck's exterior profiling.

Specifically engineered for thirteenth-generation 2015, 2016, 2017, 2018, 2019, and 2020 Ford F-150 models, this matched set delivers a flawless factory-style fit directly onto your front left and right side fender/door panels.

🛠️ Product Specifications

• Focus Keyword Product: 2015-2020 Ford F-150 Fender Door FLE 3Z-16720-E Nameplate Set

• Vehicle Compatibility: 2015–2020 Ford F-150 models

• Placement on Vehicle: Front Left & Right (Fender or Door Panels)

• Factory OE/MPN Part Number: FL3Z-16720-E (Interchanges with FL3Z16720E)

• Material: Weatherproof, automotive-grade ABS plastic

• Finish: Matte black chassis with brilliant chrome outer text framing and precise factory dimensioning

• Attachment Type: Integrated alignment tabs with pre-applied heavy-duty automotive backing adhesive

✨ Key Features & Benefits

• Authentic 13th-Gen Factory Styling: This 2015-2020 Ford F-150 Fender Door FLE 3Z-16720-E Nameplate Setfeatures the exact text fonts, multi-tiered dimension scaling, and color configuration as the factory originals, keeping your build looking completely legitimate.

• Maximum Weather Defense: Molded from premium, UV-treated automotive ABS plastic, these nameplates are engineered to resist yellowing, cracking, and peeling through blistering summer heat and freezing winters.

• Error-Free Pin Alignment: Manufactured with molded-in rear locating alignment guide pins that correspond perfectly to your truck's factory alignment holes, ensuring a perfectly straight, centered installation every time without any guesswork.

• Complete Exterior Refresh: Arrives as a matched pair (2 pieces total) to replace both the driver and passenger side badges concurrently for a completely balanced exterior look.

📦 What’s Included in the Box?

• (2) "F-150" Fender/Door Nameplate Emblems (Driver and Passenger Side Matched Pair)

🔧 Step-by-Step Installation Guide

1. Remove Old Emblems & Glue: Carefully detach your old, weathered badges using a plastic trim tool or fishing line. Use an automotive-safe adhesive remover or an eraser wheel to clear away all leftover factory tape residue from the body panel.

2. Prep the Application Panels: Clean the application zone thoroughly using rubbing alcohol to strip away lingering grease, car wax, and dirt layers. Allow the area to dry completely.

3. Test Fit Alignment: Align the locator pins on the back of the nameplate with your factory alignment holes to verify the correct orientation.

4. Peel and Stick: Peel off the protective film from the pre-applied heavy-duty adhesive backing, guide the locating pins home, and press the entire emblem firmly against the sheet metal for 45–60 seconds.

5. Adhesive Cure Time: For the absolute strongest chemical bond, keep your truck completely dry and avoid commercial car washes for 24 to 48 hours after application.

FL3Z-16720-E, FL34-16B114-CA; FL34-16B114-CB; FL3416B114CA, FL3416B114CB; FL3Z16720E, FL3Z-16720-F, FL34-16B115-CA, FL34-16B115-CB; FL3416B115CA; FL3416B115CB; FL3Z16720F