1994-2003 Ram 2500 Door Fender Nameplate 55295311 Set

Restore the authentic, muscular look of your classic truck with the 1994-2003 Ram 2500 Door Fender Nameplate 55295311 Set .Engineered as a direct-fit OEM replacement badge kit, this premium set brings back the distinct presence of your second-generation or early third-generation heavy-duty truck's exterior trim.

Product Overview

• Product Name: 1994-2003 Ram 2500 Side Door Fender Nameplate 55295311 Set

• OEM Part Number: 55295311 (Interchanges with 55295311AB and 5DV61PR4)

• Placement: Front Door / Side Fender panels (Left and Right side compatibility)

• Color / Finish: Mirror-shine chrome face with bold black contrast recessed text

• Vehicle Fitment: 1994–2003 Dodge Ram 2500 heavy-duty regular cab, club cab, and quad cab models

Key Features

• Genuine OEM Quality: Crafted to precise factory specifications to guarantee a seamless alignment alongside your truck's original body lines.

• Vintage Chrome Aesthetic: Features the classic heavy-duty "RAM 2500" block lettering styling finished in a durable premium chrome layout that perfectly accents factory or aftermarket builds.

• All-Weather Material: Injection-molded from automotive-grade ABS polymer engineered to resist UV yellowing, heavy road debris, and automated high-pressure car washes.

• Complete Restoration Pack: Includes a matching driver and passenger side pair, making it simple to complete a full body shop rebuild or correct sun-faded side panels.

Vehicle Compatibility

• 1994–2001 Dodge Ram 2500 Pickup Trucks (BR/BE second-gen heavy-duty platforms)

• 2002–2003 Dodge Ram 2500 Pickup Trucks (DR third-gen platform variations)

Step-by-Step Installation Guide

Tools Needed:

• Painter's tape (for alignment masking)

• Isopropyl alcohol (70%+ rubbing alcohol)

• Clean microfiber cloth

• Optional: Heat gun or hair dryer (highly recommended for removal & cool weather)

• Optional: Plastic trim tool or fishing line (if removing an old badge)

• Optional: Adhesive remover (e.g., Goo Gone)

Step 1: Prep & Alignment (Crucial)

1. Wash the Area: Ensure the vehicle door or fender is completely clean, free of dirt, mud, wax, and ceramic coatings.

2. Mark the Location: If replacing an old badge, apply painter's tape tightly around the borders of the original emblem before removing it. This creates a perfect frame and ensures your new heavy-duty text sits level on the body line.

Step 2: Old Emblem Removal (If Applicable)

1. Warm the Adhesive: Lightly heat the old emblem with a hair dryer or heat gun to soften the decades-old tape backing. Do not overheat the paint.

2. Slice it Free: Work a length of fishing line or a plastic trim removal tool behind the emblem in a sawing motion to slice through the old adhesive foam.

3. Clean the Residue: Use an adhesive remover to dissolve any leftover foam or sticky residue. Wipe the area completely dry.

Step 3: Surface Stripping

1. Degrease: Wipe down the bare paint surface thoroughly with isopropyl alcohol and a microfiber towel.

2. Dry: Allow it to flash dry. The surface must be completely naked (no oils, wax, or chemical residues) for the new adhesive to bond permanently.

Step 4: Application

1. Check Temperature: For best results, install in temperatures between 65°F and 90°F (18°C to 32°C). If it is cold outside, lightly warm the truck door panel with your heat gun.

2. Peel: Carefully peel the protective backing film from the rear of the new nameplate. Do not touch the exposed adhesive.

3. Align & Stick: Align the nameplate within your painter's tape outline. Gently place it onto the panel.

4. Apply Pressure: Press firmly across the entire emblem surface with a clean cloth for 30 to 60 seconds, ensuring all edges make solid contact.

Step 5: Curing

1. Remove Tape: Carefully peel away your painter's tape alignment markers.

2. Let it Set: Keep the vehicle dry and avoid washing it or driving at highway speeds for at least 24 to 48 hours to allow the adhesive to reach full cure strength.